BA Furniture Clearance
Mirror Wall Tiles Antique Finish Beveled Box of 22 Tiles
Mirror Wall Tiles Antique Finish Beveled Box of 22 Tiles
SKU
SKU:AU0530
In stock
MOQ's may apply to some products
Couldn't load pickup availability
ONLINE SALES ONLY - Delivery is available to Selected Melbourne Metro, Greater Melbourne Metro and Near Regional VIC areas only. NO Interstate deliveries. Weekday Collection of your order is also available* (See terms)
Unless Specified Otherwise, All Products are NEW & Boxed.
Description
- Mirror Wall tiles. Each box of mirrored wall tiles, antique finish, contains 22 tiles (or 0.33 square metre). You will need 3 boxes for a complete square metre.
- Dimensions: W20cm x H7.5cm
Tile Box Calculator - Enter Required Total Square Meter Coverage
Number of Boxes Needed: 0
- These tiles have an aged effect which gives them their distinctive pattern. Each tile is different and the aged effect will vary. The aged finish is more of a black/dirty finish on a silver mirror, but this can change from batch to batch as the aging is a chemical process.
- Due to the aging process applied, no two tiles will be the same.
- The images shown represent the product the best way possible as they are difficult to photograph. However, the tiles may have variances to these images when seen with the naked eye. Different lighting will also have an effect on the product look.
- A Victorian (brick size) Antique mirrored tile with a beveled edge.
- These tiles can be used in any room in your house: kitchen, bathroom, living room, etc.
- They add sparkle and glamour as well as offer a useful reflective mirror surface.
- This listing is for one box.
- The mirrored tiles can be fixed to the wall with Epoxy resin-based adhesives or silicon (not supplied). The adhesive used must be non-acidic, or it can eat into the mirror backing (not covered under any warranty).
- Grouting is optional, and mirror tiles are often left ungrouted except in wet areas. Always use non-sanded grout. Take care not to scratch the surface of the tile while spreading and cleaning the grout.
- Although it can be used in the bathroom, we do not recommend its use in areas such as wet rooms or shower enclosures.
- If required, these tiles can be cut using a mobile tile cutter. Please note, by doing so, you will be removing the beveled edge.
- Here are some recommendations for cutting these mirror wall tiles. These are a guideline only, and you should consult a professional tradesperson for accurate information on how to cut these tiles:
-
Use a High-Quality Glass Cutter: A glass cutter with a carbide or tungsten wheel will provide a clean score line, which is crucial for smooth cuts on mirror tiles.
Straight Edge and Cutting Oil: Use a straight edge to guide the glass cutter, and apply a bit of cutting oil if possible to help the cutter glide and minimize chipping.
Score and Snap Technique: Score the tile once along the desired line with firm, even pressure. After scoring, gently snap the tile along the line by applying pressure along the scored edge.
For Small Adjustments: Use fine-grit sandpaper or a diamond file to smooth any rough edges after snapping, especially on beveled edges.
- If in doubt, we recommend contacting a professional tradesperson/tile fitter. We accept no liability for damage to the tiles if cut incorrectly or by an unqualified/inexperienced person.
Share
